How To Change Shutter Speed On Canon Rebel T3i

This affiliate is from the book 

M: Manual Mode

In one case upon a time, long before digital cameras and plan modes, there was manual style. In those days it wasn't called "manual mode" because there were no other modes. It was just photography. In fact, many photographers, including myself, cut their teeth on completely manual cameras. Allow's face it—if you want to larn the effects of discontinuity and shutter speed on your photography, there is no amend way to learn than past setting these adjustments yourself. However, today, with the advocacy of camera technology, many new photographers never give this manner a 2d thought. That'southward truly a shame, equally not but is it an excellent way to learn your photography basics, it's also an essential tool to take in your photographic bag of tricks.

When y'all have your camera set to Manual (M) mode, the camera meter will requite you a reading of the scene you are photographing. Information technology's your job, though, to set both the f-end (discontinuity) and the shutter speed to achieve a correct exposure. If you demand a faster shutter speed, you will have to make the reciprocal change to your f-cease. Using whatever other mode, such equally Goggle box or Av, would mean that you just have to worry about one of these changes, just Manual way means you take to do information technology all yourself. This can be a little challenging at first, only after a while you will have a complete understanding of how each change affects your exposure, which will, in turn, better the style that you utilize the other modes.

When to Employ Manual (M) Mode

When learning how each exposure element interacts with the others (Figure 4.11)

Figure 4.xi Shooting in Manual fashion is a not bad mode to learn most how ISO, discontinuity, and shutter speed impact your exposure.
When your surround is fooling your light meter and you demand to maintain a certain exposure setting (Effigy 4.12)

Effigy four.12 Beaches and snow are always a challenge for light meters.
When shooting silhouetted subjects, which requires overriding the camera'southward meter readings (Figure 4.13)

Figure 4.13 Although the meter was doing a pretty skilful task of exposing for the vivid sky, I used Manual way to push the foreground elements into complete black silhouette.

Setting upwardly and Shooting in Transmission Mode

Turn the Mode dial to marshal the M with the indicator line.
Select your ISO by pressing the ISO push button on the top of the camera, and then turning the Master punch.
Indicate the camera at your subject and and so activate the camera meter past depressing the shutter button halfway.
View the exposure data in the lesser area of the viewfinder or by looking at the rear display panel.
While the meter is activated, use your index finger to scroll the Main dial left and right to modify your shutter speed value until the exposure mark is lined up with the zero mark. The exposure data is displayed past a scale with marks that run from -2 to +two stops. A "proper" exposure will line upward with the arrow marker in the eye. As the indicator moves to the left, information technology is a sign that you will be underexposing (there is not enough light hitting the sensor to provide adequate exposure). Movement the indicator to the correct and you lot volition be providing more exposure than the photographic camera meter calls for. This is overexposure.
To set your exposure using the discontinuity, depress the shutter release push button until the meter is activated. Then, using your thumb, concord in on the Av button on the back of the camera and then utilise your index finger to turn the Main punch right for a smaller aperture (large f-stop number) or left for a larger aperture (pocket-sized f-stop number).